- AIR QUALITY - HEATING COOLING - LAUNDRY - LIGHTING - MONITORS ALARMS - SEALING - Tools for the Energy Auditor - VENTILATION - WATER -

Panasonic WhisperCeiling Fans
Click on picture to view full-size image
Panasonic WhisperCeiling Fans
Panasonic has designed a fan to meet the task of venting with the utmost in energy efficiency. The low sone (noise) level and low input wattage allow these fans to run continuously and quietly. This is not true of the typical ceiling fan which typically runs at 3 to 4 sones (one sone is roughly equal to the sound of a new refrigerator)
while using considerably more electricity. This means that a 80 CFM (cubic feet/minute)
fan can be hard-wired to run day and night and use less energy than a 60 watt light bulb left on for 7 hrs.

Because this fan is quiet, rated for continuous use and a low-energy user, the Airetrack or Tork controls (see Ventilation Controls section) can be used to turn the Panasonic into more of a whole house fan.

All fans come with a build in backdraft damper and white metal grill. The smaller standard depth ceiling fans, up to the 110 cfm, will not perform at their best if installed in a wall. The larger fans, along with the Whisperfit can be installed in either a wall or ceiling. All of the Panasonic fans can be used with a solid state speed control.

Fan Dimensions (Links open in a new window)
PE FV 05, 08, & 11 VQ5
Note: Mounting opening on the FV05, 08, and 11VQ5 fans is 10 1/4" square. The grill is 13" square. Mounting opening on the FV 20 and FV30VQ3 fans is 12 3/16" square with a 15" square grill. The FV 40VQ3 has a mounting opening of 14 3/4" with a 17 11/16" square grill.

PE FV 15, 20, 30, & 40 VQ3

Panasonic Fan Applicable Room Area Chart
Note: This is meant as a rough estimate for fan sizing only. Please click here for more accurate sizing information.

PE FV05VQ5 - - - $154.50
50 CFMs, < 0.3 sones, 11 watts

PE FV08VQ5 - - - $164.25
80 CFMs, < 0.3 sones, 14.7 watts

PE FV11VQ5 - - - $184.50
110 CFMs, < 0.3 sones, 21.1 watts

PE FV15VQ5 - - - $225.25
150 CFMs, < 0.3 sones, 28.4 watts

PE FV20VQ3 - - - $249.75
190 CFMs, 1.3 sones, 42 watts

PE FV30VQ3 - - - $261.75
290 CFMs, 2.0 sones, 64 watts

PE FV40VQ3 - - - $396.75
380 CFMs, 3.0 sones, 112 watts


CALL FOR DISCOUNTED PRICING

Product #
Quantity desired
   



Panasonic WhisperLite Fans
Click on picture to view full-size image
Panasonic WhisperLite Fans
Same fan as the Panasonic WhisperCeiling, but with a built-in light fixture. Includes two 18-watt Panasonic compact fluorescent light bulbs (equal in light output to two 90-watt bulbs but rated for 10,000 hours) and a 4-watt night light. All WhisperLites have a 10 1/2 " square mounting opening, and include a 13" square grill.

PE FV08VQL6 - - - 80 CFMs - - - $245.25
PE FV11VQL6 - - - 110 CFMs - - - $270.00
PE FV15VQL 6- - - - 150 CFMs - - $318.00


CALL FOR DISCOUNTED PRICING
Product #, CFMs
Quantity desired
   



Panasonic WhisperGreen
Click on picture to view full-size image
Panasonic WhisperGreen
WhisperGreen Panansonics are the latest concept in efficient fans. Because of their special design, the rated CFM level holds true no matter the duct length, number of elbows, etc. This makes the fan easier for the installer, because the installation in no way hinders the fan's performance. All of these models have a super efficient DC motor. These motors are rated for a long life of 60,000 hours and carry a 6 year warranty. As with all Panasonic fans, they are the quietest on the market, low energy users, and carry the Energy Star rating.
PE FV05VK3---$187.50
PE FV08VK3---$195.00


The same unit as above with two built in 13 watt compact fluorescent lights and a 4 watt nite light
PE FV08VKL4---$275.25


The VKS model features a built-in variable speed control which allows the fan to run continuously at a preset lower speed (30-70 CFM's for the FV08 model 0-110 CFM's on the FV13 model). Turn on the switch, and the fan will run at its maximum speed of 80 CFM's on the 08 model and 130 CFM's on the 13 model. A high/low delay timer (adjustable up to 60 minutes) will return the fan to the minimum CFM level after a period of time set by the user.
PE FV08VKS3 - - - $218.25
PE FV13VKS3 - - - $254.25

The same unit as above with two built in 13 watt compact fluorescent lights and a 4 watt nite light
PE FV08VKSL4---$299.25
PE FV13VKSL4 - - -$345.00



The VKM model has all of the features of the VKS model, but operates with a built in motion sensor. The fan turns on to the high setting when someone enters a room, and turns to low for the preset time when they leave. Use this fan for maximum energy savings.
PE FV08VKM3- - - $240.00
PE FV13VKM3 ---$276.75

The same unit as above with two built in 13 watt compact fluorescent lights and a 4 watt nite light
PE FV08VKML4---$322.50
PE FV13VKML4 - - - $368.25

Same as above with 30-70 CFM (cubic feet per minute)
variable control and a 12-watt LED light with 1 watt LED nite light <.3 sones.
PE FV08KSE3 - - - $369.75

Same as the above LED fan/light but with a built in motion sensor. The fan can be set to run for a set length of time at 30-70 CFM's and will boost up to full speed when someone enters the room.
PE FV08KME3 - - - $405.25


All models are 14 1/2" square rough opening, with a depth of 7 7/8". The 05 and 08 models take a 4" duct, the 13 models take a 6" duct.

AS ALWAYS, CALL FOR DEEPLY DISCOUNTED PRICES FROM THE MANUFACTURERS PRICES LISTED ON OUR WEBSITE






Models
Quantity desired
   



Panasonic WhisperFit Fan
Click on picture to view full-size image
Panasonic WhisperFit Fan
This low profile model is only 5.5" high as opposed to the 7 7/8" height on the standard model. This means that it can fit into smaller spaces and is great for retrofit situations. Use either a 3" or 4" duct. The fan comes with a 4" to 3" reducer
PE FV08VF2 - - - $141.75- - - 80 CFM's, .8sones, 24.5 watts
PE FV11VF2 - - -$159.75- - - 110 CFM's 1.5sones 33.5 watts

WhisperWelcome Fans add a motion sensor to the WhisperFit Fan. This sensor automatically activates whenever someone enters the room. After 20 minutes, the built-in delay timer turns the fan off.

PE FV05FM2 - - - $179.25- - - 50 CFM's, 0.4 sones, 16.3 watts
PE FV08FM2 - - - $187.50- - - 80 CFM's .9 sones, 24.2 watts


CALL FOR DISCOUNTED PRICING

Options
Quantity desired
   



Panasonic Whisperwarm Fan
Click on picture to view full-size image
Panasonic Whisperwarm Fan
Panasonic's WhisperWarm is the quietest vent/heat combo. It comes with a UL listed heater with a saftey thermal cut-off fuse. The grill louvers are adjustable. This is the only Panasonic model not intended for installation directly over a bathtub or shower.
16" x 14 1/2" rough opening. .6 sones

PE FV11VHI - - - 110 CFM's - - - $306.00



CALL FOR DISCOUNTED PRICING

Options
Quantity desired
   



Panasonic Whisperwarm Fan with Light
Click on picture to view full-size image
Panasonic Whisperwarm Fan with Light
Same as the Panasonic Whisperwarm Fan with a built-in light fixture including two 13 watt (60-watt equivalent) compact fluorescent bulbs and a night light. Each feature (fan, light, night light and heater) can be operated on an separate switch (switch is not included). The mounting opening is 16" x 14 1/2". The grill is 18 1/8" X 14 1/8".

PE FV11VHL - - - .6 sones 25 watt +1400 watt heater - - - $395.250


CALL FOR DISCOUNTED PRICING

Price$300.00
Quantity desired
   



Mainstream Mobile Home Fan
Click on picture to view full-size image
Mainstream Mobile Home Fan
The 6" diameter, 65 cfm Maintream fan is a major upgrade from the standard fan that comes with a manufactured home. First of all, at 3 sones (a sone is the sound of a new refrigerator) it is much quieter than the standard fan. Second, this fan is rated for continuous use, meaning that it can operate for up to 24 hours a day, acting as a whole house venting system. Third, a butterfly damper, which keeps ouside air from coming in is an integral part of the fan.



PE MS - - - $209.00

Price$209.00
Quantity desired
   



Airius Destratifying Fan
Click on picture to view full-size image
Airius Destratifying Fan
Temperature gradients occur when there is minimal air movement within a room. Hot air generated either by the building's furnace or the heat of the sun typically rises to the ceiling . If the thermostat is set to maintain a
comfortable temperature at the floor level, the temperature will typically
rise between .5 and 1 degree per vertical foot as it heads towards the upper levels of the room.

The Airius is designed to efficiently and silently move large quantities of hot ceiling air down to the floor level. The result is that within a very short period of time, floor and ceiling temperature are within a couple degrees of each other. Thus the downstairs will be warmer and the upstairs cooler, your HVAC system will run less and do more, and the interior space will be more comfortable and more productive.

The Airius is easy to install, simple to maintain, and economical to operate. AIRIUS has models to accommodate ceiling heights from 8 - 60 feet, and 1000 -- 2500 sq. ft. The AIRIUS Thermal Equalizers operate on 110 VAC and 230 VAC (277 VAC versions are available) .

The Airius will never win a beauty contest, but it certainly gets the job done. Typically used in commercial and retail applications, it is perfect for green houses and homes, especially homes with very high ceilings. Unlike blade fans that just move around the air, the Airius aerodynamically and imperceptibly forces a column of hotter air from the ceiling downward.
Leave it running constantly, and lower your Heat & AC bill permanently!

These models are 16 high, 13 diameter weigh 12 lbs and provide
destratification for up to 1200 square feet. Call for larger sizes.
PE 10 (15 watts) for ceilings up to 12' - - - $445.00
PE 15 (17 watts) for ceilings up to 18' - - -$445.00
PE 25 (35 watts) for ceilings up to 30' - - -$445.00


Options
Quantity desired
   



Airius Suspended Ceiling Fan Kit
Click on picture to view full-size image
Airius Suspended Ceiling Fan Kit
For suspended ceilings, up to 35', add the SK kit to the Airius fan.

PE SK - - -163.43

Price$163.43
Quantity desired
   



Airius Air Cleaner
Click on picture to view full-size image
Airius Air Cleaner
The new PhotoHydrolonization Thermal Equalizer not only eliminates temperature differential and saves energy, it also sterilizes the destratified air with highly charged negative ions that sanitize, deodorize and purify the air, producing a significant improvement in air quality.
PE PH - - - $648.00

Price$648
Quantity desired
   



The Tamarack HV 1000
Click on picture to view full-size image
The Tamarack HV 1000
This is the whole house fan for you if you want slow quieter cooling while using a minimal amount of energy. Easily install the fan by cutting a hole between the joists in the floor of the attic, and screwing in the grill from the ceiling below. To operate, open your windows in the evening when nightime air is cooler, turn on the fan, and the R38 insulated doors will open to let the cool air wash through your house and push the hot air out of your preexisting attic vents. In the morning, turn off the fan and the doors will close, sealing up your attic. Close the windows to leave that cool air inside. This fan is designed for homes up to 1500 square feet.
HV1000
Power Requirement ► 115VAC 60 Hz 60 Hz
Fans Running ► 116 watts
Lift Motors Running ► 6 watts
Open/Close Time ► 30 seconds
Air Flow @ .1" SP ► 1000 cfm cfm high
Sound Level ► 3 sones TBA
Interior Grille ► Return Air
Grille Color ► White
Weight ► 17 lbs. (shipping 32 lbs.) 21 lbs. (shipping 34 lbs.)
Pressure relief required ► 1.5 sq' of attic vents
Rough Opening. ► 14.5" x 22.5"
Height w/ Doors Open ► 12 " @ R38


PE HV 1000-DB---$579.00 R-38 insulated doors.

PE HVR---$90.00
Separate remote control unit can be added to any model. Has an easily installed box that can be returned for repair, or to replace a lost remote control. The PE HV 1000-R requires that the whole unit be returned for remote control replacement.


Accessories and Options
Quantity desired
   



Tamarack HV 1600 2-Speed Gold Series
Click on picture to view full-size image
Tamarack HV 1600 2-Speed Gold Series
The Tamarack HV1600-GDR has all of the energy efficient features of the HV1000 (above) in a more powerful two speed model with remote control. Lower, quieter speed is 1150 CFM's and the more audible, powerful high speed is 1600 CFM's. The physical size is the same as the HV 1000.
PE HV 1600---$859.00

PE VG - If the fan is to be mounted on a wall, order this verticle grill - vents run in the long direction - so that the inside of the fan will not be visible. Fits both HV models.
PE VG - - -$51.60






Options
Quantity desired
   



Tamarack TC1000 Whole House Fan
Tamarack TC1000 Whole House Fan
Use this top of the line whole house fan if you don't have an attic. It is also a great option for sun spaces. The low-profile housing fits into the roof or sidewall of your home or greenhouse. The TC has an R 6.1 insulated cap that lifts up to open when the fan is on, and closes to make a tight seal when it is off . The 800 cfm fan pushes stale hot air out of the vent opening once the cover is lifted.
If the fan is to be used on the roof, a "thimble" is needed to connect between the ceiling and the unit. An attractive interior white metal grill is also available. The TC1000 runs on 115VAC. Price includes an on/off switch
Rough opening is 12 1/2" x 27".

PE TC-H Solid roof wall fan - - - $859.00
PE TC-T Sunroom/Patio fan - - - $938.00


models
Quantity desired
   



The Tamarack Ghost
Click on picture to view full-size image
The Tamarack Ghost
For larger homes, you need a Ghost Whole House Fan. When the Ghost is turned on, the insulated doors open into the attic. The fan then turns on, and pulls warm house air up through the unit and forcing this heated air out your attic vents. Because the motor is housed in the top part of the unit, this model is significantly quieter than your typical whole house fan. The Ghost two speed fan is rated at 3400 CFM (cubic feet per minute) on high, 1900 CFM on low. It comes with a 6' power cord for easy installation, a remote control, and a white interior grill.

Specifications
115 VAC
Insulated R-38 doors that open only when the fan is on, so there is no hole in your attic insulation.
48 lbs
comes in two pieces - total height 27 5/8", rough opening 26" x 29 1/2"
Requires 9 square feet of attic vent
Can be hardwired to a wall switch

PE Ghost R38 - - - $1399.00

The price includes an attractive white metal grill.

R values
Quantity desired
   



QuietCool No Attic Fan
Click on picture to view full-size image
QuietCool No Attic Fan
Need a whole house fan but have no attic, or a very small attic space? Use this amazing roof mounted whole house fan by QuietCool. It even works on mobile homes.
Depending on the fan that you order, the unit will move 1130 or 2245 cubic feet/minute, and work through the night to replace your home's warm stale air with clean fresh air 15 to 20 times per hour. The fan works just like a giant vacuum cleaner sucking out heat, odors. germs, etc. and replaces warm air with colder night time outdoor air. Close up your house in the morning, and that cool air will stay in your home until you turn the fan on again in the evening.

How do you know which model to order?

There are 3 no attic models; curbed, flat, and sloped.
If your roof is flat or slightly sloped (up to a 2/12 pitch) you will need either the flat roof or curbed roof model. Use the Curbed Roof model if there is a parapet or roof drain. Use the Flat Roof model if rain drains right over the edge of the roof.

Use the sloped fan for a roof greater than 2/12 pitch. If the roof is sloped steeper than 6/12, you can not use the roof mounted fans.

PE RMES-1100FLT - 1130 CFM fan for flat roof mount with 14" duct collar---$529.00
PE RMES-2200FLT same as above but 2245 CFM's and 16" collar---$629.00
PE RMES-1100CRB - 1130 CFM fan for flat roof with curb with 14" collar---$549.00
PE RMES-2200CRB same as above but 2245 CFM's 16" collar---$649.00
PE RMES-1100SLP - 1100 CFM fan for sloped roof with 14" collar---$569.00
PE RMES-2200SLP - same as above but 2245 CFM's 16" collar-- -$659.00

If the ceiling is right below the roof, you don't need any extra accessories, unless you want to close the opening when the fan isn't running. In that case, order the PE QC-13362 gravity damper that mounts to the bottom of the fan.
PE QC-11362---$70

If there is 20 inches or more of space between the roof and the ceiling (even if there is no access to this space) you will need the ceiling box and damper grill kit (PE QC-60019 or QC-60020) and the PE QC-12005 or PE QC-12010 insulated duct to bridge this gap and connect the fan to the ceiling grill.
PE QC60019 for 14" duct---$110
PE QC60020 for 16" duct---$120
PE QC12005 14" x 6' insulated duct---$60
PE QC12010 16" x 6' insulated duct---$70


If there is less than the 20" space and the ceiling below is attached to the bottom of the rafters and the roof attached to the top of the rafters, this creates an enclosed duct, and you will need the PE QC-60018 or PE QC-60014 grill and damper kit.
PE QC-60018 - 16" x 16" ---$100
PE QC-60014 - 16" x 20 "---$110

Roof Type
Quantity desired
   



Fan On/Off Switch and Timer
Click on picture to view full-size image
Fan On/Off Switch and Timer
Use the dual switch with 6 hour timer (PE WST-2 ) for two Quiet Cool fans or for the Quiet Giant (one on/off switch for high speed and one on/off for low).
PE WST-2---$59.99

Use the triple on/off switches with the six hour timer to operate 3 Quiet Cool fans. Click on the dual switch picture to view this option.
PE WST-3---$67.95
number of switches
Quantity desired
   



Envirocool Whole House Evaporative Cooler
Click on picture to view full-size image
Envirocool Whole House Evaporative Cooler
Attic air temperatures can reach almost 200 in the summer months. The Envirocool and whole house fan combination cools your home and your entire attic as well, thus eliminating the attic "hot air blanket" effect.

The Envirocool Is Not Your Grandma's Swamp Cooler!
This system is not the troublesome old evaporative cooler or "Swamp Cooler" that many homeowners have come to know from the past.

There is no excessive moist, humid air being forced into the home, leaving it damp and smelly.

There is no loud or noisy fan blowing.

There is no big or ugly box hanging from your windows or sitting on top of your roof.

There is no tedious maintenance requiring you to change the cooler pads, clean the sump, or cover the unit during the cold winter months.

Warranty is 5 years on parts.

Further Specifications:
EnviroCool
PE EC-3040 vertical mount PE EC-4824 horizontal mount
Wall opening 30w x 40h 48w x24h
Interior grill 32w x 42h 50w x 26h
Exterior size 34 ?w x 50h x 11 ?d 52 ?w x 34h x 11 ?d

ENVIROCOOL SPECIFICATIONS
Model EC3040 (vertical) Model EC4824 (Horizontal)
Nominal Size (wall opening) 30"w x 40"h 48"w x 24"h
Interior Grill Size 32"w x 42"h 50"w x 26"h
Exterior Dimensions 34-3/4"w x 50-1/8"h x 11-1/2"d 52-1/4"w x 34-/8"h x 11-1/2"d
Pump Motor Voltage 120V AC 60Hz 120V AC 60Hz
Pump Motor Power Consumption 25 Watts 25 Watts
Cooling Media Thickness 8" 8"
Cooling Media Effective Area 7.92 square feet 7.33 square feet
Effective Cooling Capacity @ 87% Efficiency 7,128 CFM 6,597 CFM

7060 Media: 7mm flutes 45 degrees one direction
15 degrees the other (low density)
7060 Media Specifications
Base Sheet: Cellulose
Max Air Temp: 300 Degrees F
Max Water Temp: 130 Degrees F
Dry Weight: 1.8 lb/cf
Wet Weight: 3.5 lb/cf
pH Range: 6-9


PE EC-4824 Horizontal Unit ---$1595.00
PE EC-3040 Verticle Unit--- $1595.00


Need more information? Click here www.quietcoolsystems.com
Orientation options
Quantity desired
   



QuietCool Fan
Click on picture to view full-size image
QuietCool Fan
The QuietCool PE QC-1500 fans are a multi-fan approach to whole house venting. The fans are unbelievably quiet because they attach and hang from your attic rafters, totally isolated from your living areas. The fans are located at the end of an insulated duct. This ductwork then connects to an attractive square ceiling grill supplied with the unit. The grill is placed in an opening in the attic floor. Because of this unique installation, they cause no vibrating of the attic floor directly over living spaces. They are rated at a super quiet .4 sones, a sone being the sound of a new refrigerator -so quiet, they are frequently installed with a vent into a bedroom! The fan has an R-5
damper that seals tightly when the Quiet Cool is not in use. An insulated cover can be put over the vent for extended periods when cooling is not required.
Just open up windows when the night air is cooler than inside air, and let your Quiet Cools pull this cool air through the house, and up into the attic to cool the attic. Pressure from the fans pushes this warm air out though your existing roof vents.
The Quiet Cools can be controlled individually, or multiple fans can be wired to a single wall switch, timer, or remote control. With this flexibility, you can control when, where, and how much air flows through your home by simply turning on or off your individual Quiet Cool fans. With each fan using only 136 watts, the savings over air conditioning usage are huge.

Here is an installation video to give you a better idea of how these fans work.

Heres how to estimate approximately how many PE QC-1500s you will need:
One Story Home
1000 sq ft 2 fan system
1500 sq ft 2-3 fan system
2000 sq ft 3 fan system
2500 sq ft 3-4 fan system
3000 sq ft 3-5 fan system
4000 sq ft 4-6 fan system

Two Story House
1000 sq ft 2 fan system
1500 sq ft 2-3 fan system
2000 sq ft 3 fan system
2500 sq ft 3-4 fan system
3000 sq ft 3-5 fan system
4000 sq ft 4-6 fan system

To control this fan, use a standard on/off switch. For a better option, see the PE WST above

Specifications PE QC 1500
Power Consumption - 136 Watts
Air Flow 1527 cubic feet/minute
Voltage 120 VAC
Sound level in room - .4 sones, 43 db
R value at closed damper doors R 5 (closes magnetically)
Ceiling rough opening 14 1/4" x 14 1/4"
Grill White.
Fits all Joist spacing. No framing needed
Shipping weight 36 lbs.
10 year warranty
QC 1500---$540.00

Another option for larger rooms, the two speed PE QC2250. At 2463 cfms on high, this fan will really clear the heat out of larger rooms or small homes with area of 500 to 1500 square feet. The lower, quieter speed provides a 1829 cfm air flow at 199 watts. As with the PE QC1500, this fan can be used with a remote control, or hard wired.


Specifications PE QC-2250
Power Consumption - 249 Watts high 199 watts low
Air Flow 2463 cubic feet/minute high, 1829 low
Voltage 120 VAC
Sound level in room - .6 sones, 45 db
R value at closed damper doors R 5 (closes magnetically)
Ceiling rough opening 14.25 X 18.25"
Grill white
Fits all Joist spacing. No framing needed
Shipping weight 42 lbs.
10 year warranty
PE QC-2250---$649.00

The largest single duct classic QuietCool is the QC4700. two-speed fan. This fan requires hard wiring to a switch for the two-speeds. It is perfect for homes up to 2400 square feet.
Specifications PE QC-2250
Power Consumption - 533 Watts high 491 watts low
Air Flow 4757 cubic feet/minute high, 3586 low
Voltage 120 VAC
Sound level in room - 54 db
R value at closed damper doors R 5 (closes magnetically)
Ceiling rough opening 14.25" X 26.25"
Grill white
Fits all Joist spacing. No framing needed
Shipping weight 56 lbs.
10 year warranty
PE QC-4700---$999.00

Add a remote control to any QuietCool Fan package
PE IT60100---$70.00



Need more information? Click here www.quietcoolsystems.com


Fan Options
Quantity desired
   



Quiet Giant Whole House Fan
Click on picture to view full-size image
Quiet Giant Whole House Fan
At 4712 CFMs (cubic feet of air moved/minute) each QC4500 Quiet Giant is equal to three Quiet Cool Fans (see PE QC 1500). The unit is made up of two fans, each connected to a 6 insulated duct. The two ducts join at a single 16 x 38 ceiling grill. Just like the Quiet Cool fans, the Quiet Giant is extremely quiet because it is hung from your attic rafters, instead of being mounted on the attic floor. The fan is rated at .6 sones, a sone being equivalent to the sound of a refrigerator turning on. Each motor has insulated, positive closing damper doors that prevent air flow between the attic and the home when the fans are not in use. The two fans can be turned on separately, providing 4712 cfms on high, and 2457 cfms on low speed.

Typically, the Quiet Giants are installed in a central hallway.
Besides the cooling and energy savings benefits that you realize when you use whole house fans, they are also an excellent way to provide whole house ventilation. Even in the winter, the fan can be used briefly to exhaust stale indoor air, odors, germs, moisture, etc.

Power consumption - 249 watts low speed 498 high speed
Air Flow 4712 CFMs high speed, 2457 CFMs low speed
Voltage - 120 VAC
Sound level - .6 sones
Duct diameter - 16"
R-value at closed damper doors R 5
Ceiling rough opening - 14 1/4" x 36 1/4"
Shipping weight (shipped in three boxes) 75 pounds
PE QC 4500---$1239.00

The QC 6400
Power consumption - 329 watts low speed 658 high speed
Air Flow 6412 CFMs high speed, 3226 CFMs low speed
Voltage - 120 VAC
Sound level - 50 db
duct diameter - 16"
R-value at closed damper doors R 5
Ceiling rough opening - 14 1/4" x 36 1/4"
Shipping weight (shipped in three boxes) 87 pounds
PE QC 6400---$1399.00


Use either fan with the dual on/off switch for high and low speeds, and a 6 hour timer (See PE WST above for a description and picture)




QuietGiant sizes
Quantity desired
   



QuietCool Energy Saver Fan, 2-speed
Click on picture to view full-size image
QuietCool Energy Saver Fan, 2-speed
This fan is the newest and most powerful of the QuietCool energy efficient line of fans. Two fans use one ceiling grill outlet, and allow for 2 operating speeds. As with all QuietCool fans, everything is include with the exception of the controls, which you can select yourself for your unique application.

PE QCES-5400
120 VAC
power consumption 358 watts high, 179 watts low
Air flow - 5412 CFM high, 2860 CFM low
duct diameter - two at 16" , length two at 6' each
sound level in room - 49db
R-value at closed damper 4.2
ceiling rough opening 14.25" x 36.25"
white intake grill
shipping weight 25 lbs and 35 lbs (2 boxes)
PE QCES-5400---$1989.00
Price$1989.00
Quantity desired
   



QuietCool Energy Saver Fan
Click on picture to view full-size image
QuietCool Energy Saver Fan
The QuietCool ES line of fans feature a DC brushless motor for high energy efficiency.

PE QCES-1250
120 VAC
power consumption 36 watts
Air flow - 1265 CFM
duct diameter - 16" , length 6'
sound level in room - 42db
R-value at closed damper 4.2
ceiling rough opening 14.25" x 18.25"
white intake grill
shipping weight 25 lbs and 15 lbs (2 boxes)
PE QCES-1250---$699.00

PE QCES-1700
120 VAC
power consumption 76.8 watts
Air flow - 1765 CFM
duct diameter - 16" , length 6'
sound level in room - 43db
R-value at closed damper 4.2
ceiling rough opening 14.25" x 18.25"
white intake grill
shipping weight 25 lbs and 15 lbs (2 boxes)
PE QCES-1700---$789.00.00

PE QCES-2000
120 VAC
power consumption 88.8 watts
Air flow - 2035 CFM
duct diameter - 16" , length 6'
sound level in room - 43db
R-value at closed damper 4.2
ceiling rough opening 14.25" x 18.25"
white intake grill
shipping weight 25 lbs and 15 lbs (2 boxes)
PE QCES-2000---$899.00.00

PE QCES-2850
120 VAC
power consumption 177.6 watts
Air flow - 2855 CFM
duct diameter - 16" , length 6'
sound level in room - 47db
R-value at closed damper 4.2
ceiling rough opening 14.25" x 18.25"
white intake grill
shipping weight 25 lbs and 15 lbs (2 boxes)
PE QCES-2850---$969.00.00

CFM levels
Quantity desired
   



Panasonic Spot/Whole House ERV
Panasonic Spot/Whole House ERV
All Panasonic ventilation fans combine energy efficiency and quiet operation. The new Panasonic WhisperComfort spot ERV fan series uses two ducts -- one to exhaust stale air and the other to supply fresh air from outside. Its low-rate, continuous run helps ensure that volatile organic compounds (VOCs) and other chemical and biological indoor air pollutants are vented out and replaced with fresh air. WhisperComfort technology provides a continuous, low-rate balance airflow to help improve indoor air quality. When air is brought in from the outside, the capillary core inside the WhisperComfort fan transfers heat and moisture to the supply air. This exchange both tempers the supply air coming in from outdoors and transfers moisture to maintain a comfortable indoor living environment.

The American Society of Heating, Refrigerating, and Air Conditioning Engineers (ASHRAE) set a standard for whole house ventilation, requiring that continuous mechanical ventilation be 7.5 cubic feet per minute (CFM) per bedroom plus 1 CFM per 100 square feet. Panasonic WhisperComfort ERV fans are an affordable, efficient way to meet this ventilation standard. Since the WhisperComfort is a spot or larger area ERV, it can be installed in the ceiling of a single room or in common hallway, allowing for a whole-house ventilation system that meets the ASHRAE 62.2 standards to improve indoor air quality.

WhisperComfort model number FV-04VE1 has two 2-speed setting options: 10/20 CFM or 20/40 CFM. The mechanical engineer or contractor will usually select the appropriate setting based on the size of the home and ASHRAE 62.2 guidelines. The default setting is 20/40 CFM and can be changed to lower 10/20 CFM prior to installation by repositioning a Molex plug accessible in the junction box from outside the housing.

WhisperComfort operation can be designed two ways. For "Spot Ventilation" to meet CSA-F326; 10 CFM is suitable for a single bedroom, living room or family room, while 20 CFM is suitable for a master bedroom or large basement room. For "Whole House Ventilation" (IAQ) to meet ASHRAE 62.2; 20 CFM is suitable for 1 bedroom in a 500 square foot home, while 40 CFM is suitable for 2 bedrooms in a 1,750 square foot home. For living spaces with 3 or more bedrooms and greater than a 1,000 square foot home a second affordable WhisperComfort can be added.

In addition, the WhisperComfort ERV fan features a frost prevention mode that automatically turns on when the outdoor temperature drops below 32 degrees Fahrenheit. During frost prevention mode, the WhisperComfort cycles between exchange air and exhaust only air to prevent core freezing.

PE FV04VE1---$502.50
CALL FOR DISCOUNTED PRICING
Price$502.50
Quantity desired
   



Panasonic ERV Dual Chamber Wall Cap
Click on picture to view full-size image
Panasonic ERV Dual Chamber Wall Cap
Ideal for use with the Panasonic FV 04VE1, this exterior wall cap is an attractive and efficient way to provide a channel for both supply and exhaust air with a single 5 1/2" penetration. The interior Y-adaptor connects to the 4" diameter supply and exhaust ducts, transitioning to a single wall cap. Both the interior Y-adaptor and external wall cap divide into two chambers to separate supply and exhaust air flow. The wall cap is polypropylene, and can be painted.

PE FV-WC04VE1---$87.00
Price$87.00
Quantity desired
   



The Breeze ERV
Click on picture to view full-size image
The Breeze ERV
The Breeze ERV is easier to install that the traditional ERV. It mounts directly to a furnace return air duct or to an exterior wall with just two duct connections. Effective ventilation is insured with an integrated automatic proportional runtime control. Because it is a balanced ventilator, the Breeze simultaneously exhausts stale air and delivers an equal amount of fresh air back into the home. As with all ERVs, this model uses free recovered energy to moderate the incoming air temperature and humidity from the extremes of outdoor weather conditions.

Click here for further information.



PE BR70 - - - - for homes up to 1500 square feet - - - $682.50
PE BR 130 - - - for homes up to 2700 square feet - - - $812.50


If you will be doing a through-the-wall installation, you will need a TWBR Kit which includes ducts and hoods.
PE TWBR 70 - - - $130.00
PE TWBR 130 - - - $130.00



Replacement Motor/Blower Assembly
*Be sure to note the serial number of your unit on all orders, as older units use different assemblies. This part number should be entered in the "comment" section of the order form. We can not process your order without this information.

PE BR70A blower assembly for the BR70-$247.00
PE BR130A blower assembly for the BR130---$260.00


PE 990447 3 pack of filters---$44.50
PE 990076 10 pack of filters---$89.00

Options
Quantity desired
   



TW BR Kit
TW BR Kit
If you will be doing a Renewaire Breeze through-the-wall installation with either of the Breeze models, you will need a TWBR kit which includes ducts and hoods.

PE TW- - - $130.00

Model
Quantity desired
   



Renewaire Energy Recovery Ventilator (ERV)
Click on picture to view full-size image
Renewaire Energy Recovery Ventilator (ERV)
The Renewaire core of this product is an engineered composite resin partition plate. Fresh incoming air is pulled into this core and preheated or precooled, depending on the season. An equal amount of stale room air is exhausted at the same time, creating a balanced system. As opposed to an HRV (Heat recovery ventilator)in winter, an ERV exchanges moisture as well as heat. The core works to prevent indoor humidity levels from becoming too dry or too humid by the partial transfer of water vapor. By the same method, summer outside air brought in for ventilation is reduced in temperature and humidity because heat and moisture are transferred to the exhaust air stream. The core on this system (unlike most other brands) stays frost free, requiring no defrost cycle or drain line to deal with. This mechanical simplicity means low maintenance and less energy usage. All EV models can be mounted either horizontally or vertically.

The new EV 90 exceeds Energy Star standards for exhaust fans by 40% . It uses a mere 4 CFM's/watt.
PE EV 90 - - - - - - $617.50
For homes up to 2000 square feet of living space.
Complete Specifications (106 KB .pdf file, Opens a new window.)

PE EV 130 - - - - - - $728.00
For homes up to 2750 square feet of living space.
Complete Specifications (106 KB .pdf file, Opens a new window.)

PE EV 200 - - - - - - $962.50
For homes up to 4000 sq. ft. living space.
Complete Specifications (106 KB .pdf file, Opens a new window.)

PE EV 300 - - - - - - $1099.50
For homes up to 6000 sq. ft. living space.
Complete Specifications (106 KB .pdf file, Opens a new window.)

Notes: The EV130 and EV200 can be mounted in either stand-alone or furnace tie-in configurations.



Renewaire Replacement Motor/Blower Assemblies
*Be sure to note the serial number of your unit on all orders, as older units use different assemblies. This part number should be entered in the "comment" section of the order form. We can not process your order without this number.
PE EV70A blower assembly for the EV 70---$247.00
PE EV90A blower assembly for the EV 90---$104.00
PE EV130A blower assembly for the EV130 (Renewaire part #992218)--$247.00
PE EV200A blower assembly for the EV 200 (Renewaire part #992279)--$260.00
PE EV300A blower assembly for the EV 300 (Renewaire part#992280)--$292.50


The Renewaire filters fit all EV and BR models
PE 990447 3 pack of filters, 2 filters/pack---$44.50
PE 990076 10 pack of filters, 2 filters/pack---$89.00

Call us for pricing on other Renewaire parts and accessories

Model
Quantity desired
   



Renewaire Wall Caps
Click on picture to view full-size image
Renewaire Wall Caps
These 6" vinyl wall caps have a low pressure drop design and a cleanable metal screen.

White or brown
PE V106 - - -$14.50


Price$14.50
Color
Quantity desired
   



Renewaire Push Button Timer
Renewaire Push Button Timer
Use the Push Button Point-of-Use Timer for short periods of operation - for example during a shower. Press the Renewaire logo and your ventilator will run 20 minutes. Press again and the unit will run 40 minutes. A third press and the unit will run for a 60 minute cycle. Cancel a cycle at any time by holding down the logo for 5 seconds. To be used only when wired to the PE PTL and operating a Renewaire EV series product.

PE PBL - - - $26.00

Price$26.00
Quantity desired
   



Renewaire Percentage Timer
Renewaire Percentage Timer
This percentage timer automatically turns on your EV every hour. By touching the pad, select the percentage of time per hour (10% to 100%) that your unit will run. To be used only with the Renewaire EV series.

PE PTL - - - $52.00

Price$52.00
Quantity desired
   



Renewaire Percentage Timer with Interlock
Click on picture to view full-size image
Renewaire Percentage Timer with Interlock
The Renewaire Percentage Timer with Interlock operates like the PT24. In addition to setting the percentage of time fresh air will be brought in to your home, it also tells your furnace or air-conditioner to turn on and to circulate air. To be used only with the Renewaire EV

PE FM - - - $65.00

Price$65.00
Quantity desired
   



Renewaire Dehumidistat Control
Click on picture to view full-size image
Renewaire Dehumidistat Control
The Renewaire Dehumidistat Control sets the ERV to go on and off when set humidity levels are reached. Unlike the other Renewaire controls that work with 24 volt loads only, this unit can be switched to control a 120 volt unit.

PE DH24 - - - $52.00

Price$52.00
Quantity desired
   



Insulated Flex Ducts
Click on picture to view full-size image
Insulated Flex Ducts
This ducting is used when the run goes through an unconditioned space. In general, flexible ducting will insure a decreased noise level over rigid duct.

4" x 24' (other sizes available), R-4

PE FD4 - - - 4" x 25' - - - $26.50
PE FD6 - - - 6" x 25' - - - $36.00
PE FD8 - - - 8" x 25' - - - $42.50

Product #: Size
Quantity desired
   



Famco Plastic Dampered Vents
Click on picture to view full-size image
Famco Plastic Dampered Vents
Famco plastic dampered vents have a long tail piece that makes an easy connection with insulated ducting.

PE DV - - - 4" diameter tail - - - $12.30
PE DV - - - 5" diameter tail - - - $13.80
PE DV - - - 6" diameter tail- - - $15.20

Size
Quantity desired
   



Wall Vent
Click on picture to view full-size image
Wall Vent
This galvanized vent with bug screen can be used for fans or dryer to exhaust through an exterior wall.

PE 4020655 for 4" duct- - - -$13.00
PE 4020656 for 6" duct- - - -$19.75

Product#, Size
Quantity desired
   



Broan Kit
Click on picture to view full-size image
Broan Kit
The Broan kit includes roof cap, 8' x 4" vinyl hose, clamp, connector, and reducer.

PE RC - - - - - - $28.00

Price$28.00
Quantity desired
   



The Heartland Vent
Click on picture to view full-size image
The Heartland Vent
This vent can be used as a dryer or fan vent. It can be exterior wall or roof mounted. This model is far superior to a standard louvered vent in several ways. First, the unique closure system prevents drafts from entering and keeps out leaves and outside debris, which can clog louvered vents. Additionally, the thermal plastic closure doesn't conduct heat as metal does, and it reflects moisture to retard frost formation. These vents are available with a spring-loaded shuttle for use with low-pressure fans.

PE HL - - - $14.75

Low-Pressure Spring for the Heartland Vent
PE HLS - - - $3.60

Options
Quantity desired
   



Fantech Adjustable Grill
Fantech Adjustable Grill
Fully adjustable plastic supply/exhaust vent with metal mounting collar for attaching ductwork.

PE HG4---for 4" duct $12.53
PE HG5 --- for 5" duct $14.10
PE HG6---for 6" duct $15.00
Sizes
Quantity desired
   



Y-Fittings
Click on picture to view full-size image
Y-Fittings
These fittings, made of sheet metal, are used for splitting duct runs, for instance, when one fan will to used to exhaust two bathrooms.

PE Y4 - - - $13.00
4"x 4"x 4" ducting

PE Y6 - - - $16.75
6"x 6"x 6" ducting

Product#, Size
Quantity desired
   



Butterfly Dampers
Butterfly Dampers
For fans that do not have built-in back draft dampers, our butterfly dampers should be used to prevent cold air from entering the house. These Famco dampers are galvanized and have a high-quality foam seal to prevent air infiltration. They can be used in either vertical or horizontal applications.

Dimensional Data
Size 4: A=4, B=6, C=1.75, D=0.5
Size 5: A=5, B=6, C=1.75, D=0.5
Size 6: A=6, B=6, C=1.75, D=0.5
Size 7: A=7, B=7, C=1.75, D=0.5
Size 8: A=8, B=8, C=1.75, D=0.5

Product#, Size
Quantity desired
   



Fresh 80 Air In-Let Vent
Click on picture to view full-size image
Fresh 80 Air In-Let Vent
If you want to introduce outside air into a tight house, use this passive vent to bring outside air in. Use the template provided to cut a circular opening high up on the wall of any room with an exterior wall. The Fresh 80 is a complete unit that telescopes up to 8" to fit different wall thicknesses. It opens and closes with the pull of a string, although generally it is kept in the open position. The unit contains a washable filter so that allergens, leaves, etc can't enter the home. The picture is oriented so that the interior of the home would see the left side of the vent, and the exterior wall the right.
White plastic.

PE F80------------------$30.50
If your wall is thicker that 8", use the 6" adjustable extension
PE 80X 6" extension---------$9.00
PE 80F replacement filters ----$8.00




Measurements Fresh 80

over all length 9.5"
length of tube 6.5"
Tube diameter 3.5"

**6" extension tubes are available




Parts
Quantity desired
   



Fresh 100 Air In-Let Vent
Click on picture to view full-size image
Fresh 100 Air In-Let Vent
The Fresh100 is a larger version of the Fresh80.
Measurements Fresh 100

over all length 9.5"
length of tube 6.5"
tube diameter 4 1/8"

Hole size 4 1/8

* max wall thickness is 9 1/2"
**6" extension tubes are available

PE F100--------- $41.50
PE 100X 6" extension--------- $10.00
PE 100F replacement filters----------$89.50

Parts
Quantity desired
   



Aldes Airlet 600 Humidity Controlled Fresh Air
Click on picture to view full-size image
Aldes Airlet 600 Humidity Controlled Fresh Air
The Airlet 600 is a unique make-up air inlet that auomatically adjusts the incoming airflow according to interior humidity levels of the room in which the unit is installed. The rectangular grill in the picture at left is what you will see mounted on your wall. Click on this picture to see the tube, which goes through the wall (3) and the grill on the exterior side of the wall (6). The tube (3) is 4" in diameter, and almost 14" in length. It can be cut easily to fit thinner walls. The vent opens when indoor humidity is 50% and closes when it goes down to 35%.

PE AL600---$140.40
Price$140.40
Quantity desired
   



Panasonic Whisperwall Wall-Mounted Fan
Click on picture to view full-size image
Panasonic Whisperwall Wall-Mounted Fan
Because of it's unique condenser motor design, this fan is rated to run continuously while using 1/4th the electricity of the typical wall fan. At 1.1 sones, it is virtually silent. It can be used as a spot ventilator to clear out temporary moisture and odors, or left running for continuous exhaust of stale indoor air. The price includes a flexible 8" diameter duct (adjustable from 5 1/2" to 8" in length) and a sturdy galvanized exterior wall grill.

Fan Dimensions (Opens a new window.)

PE FV08W - - - $273.00
70 CFMs, 18 watts, 1.1 sones

CALL FOR DISCOUNTED PRICING

Price$273.00
Quantity desired
   



The Aldes Range Exhaust
Click on picture to view full-size image
The Aldes Range Exhaust
Remote mount range fans are a quieter alternative to the roar of a hood mounted fan. They are mounted in the attic, and connect to the range hood via duct work. Duct work then connects the other side of the fan to a roof vent. These well made range exhaust fans are built for long lasting and efficient ventilation. Each package includes the fan and mounting bracket. The fan can be mounted in any orientation. Just add your own duct and hood for complete installation. Size fans by using the code requirement of 100 CFMs (cubic feet per minute air moved) per square foot of hood area.

These fans are also available in a kit, which includes a duct silencer and variable speed control. Please call 800.488.4340 for pricing.

PE A-6HP - - - -450 CFMs - - - $234.78
11.5" x 6", 6" duct

PE A-8HP - - - -470 CFMs - - - $287.00
13.25" x 6.25", 8" duct

PE A-10HP - - - 560 CFMs - - - $326.82
13.25" x 5.25", 10" duct

PE A-12HP - - - 880 CFMs - - - $447.72
16" x 8.25", 12" duct



Options
Quantity desired
   



The Aldes Range Fan Solid State Control
Click on picture to view full-size image
The Aldes Range Fan Solid State Control
The advanced technology of the Aldes HP fans (see above) permits the use of a solid state control to vary the fan speed from 100% to a full stop without danger of over heating. This results in further energy savings and noise reduction.

PE 99002 - - - $18.75

Price$18.75
Quantity desired
   



Fantech PB Kits
Click on picture to view full-size image
Fantech PB Kits
The Fantech In-line fan is designed to be installed between sections of round duct. This remote installation insures a low sound level at the grill. Indoors, the fan is usually installed in the attic with ductwork leading to a bathroom ceiling grill from one end of the fan, and ductwork leading to an outdoor roof or sidewall vent coming from the opposite end. Because the housing is made of Noryl plastic, the fan can also be mounted in outdoor (above ground) and wet locations. In addition, the fan is sealed to prevent moisture from entering the housing and to prevent leakage if the fan is to be used for radon mitigation. With the use of a Y-connector, a single in-line fan can ventilate two areas. Sound absorbing accessories are available, but are necessary only for very short duct runs.

Sample Applications
Range hood exhaust
Dryer booster

The Fantech PB 100 Kit The kit includes a 110 CFM fan, one mounting bracket, one ceiling grill with housing (in other words, everything that you need with the exception of the ductwork and on/off switch) uses 4" duct.
PE PB110 - - - $151.20

The Fantech PB 190 Kit
Same as above with a 190 CFM fan (uses 6" duct )
PE PB190 - - - $173.20

Fantech Kits
Quantity desired
   



The Fantech Deluxe Kits
Click on picture to view full-size image
The Fantech Deluxe Kits
Here's a way to ventilate two room with one fan. Using the Y connector right under the attic mounted fan allows for easier installation, a quieter application, and the need to put only one hole in the roof! Everthing you need is in the kits, with the exception of the duct work which attaches from the grill to the Y and from the Y to the roof vent. Sample Applications
Dual bathroom exhaust
New room addition
Radon gas mitigation

The Fantech PB270-2 Kit Includes a 270 CFM inline duct fan, Y-connector with two 4" arms and a main 6" arm (which connects to the duct work going to the roof vent) and two 4" ceiling grills with housing and dampers.
PE PB270-2---$203.25

The same unit as above but with a 14 watt compact fluorescent lamp in each grill housing.
CLICK ON THE PICTURE TO SEE THIS MODEL
PE PB270H-2---$290.25



The Fantech PB270FV-2Kit
Same as above but each grill contains a 14 watt (60 watt incandescent equivalent) instant on compact fluorescent bulb.
Fantech PB270FV-2 - - - $261.30

Dual Point Kits
Quantity desired
   



Fantech Radon Fan
Click on picture to view full-size image
Fantech Radon Fan
Radon is a cancer causing natural radioactive gas. In today's better insulated homes, radon can accumulate to dangerous levels. According to the EPA, 1 out of every 15 homes in the U.S. has a radon problem. The only way to know is to test. We sell radon test kits as well as radon fans. http://www.positive-energy.com/monitors_alarms/radon_testing.html. If testing in your residence results in an unacceptable concentration, use a radon fan to mitigate the problem. The fan works by lowering the pressure under the basement's slab floor to allow the radon to be evacuated.This fan has been engineered specifically for the higher pressure capability requirements needed for radon mitigation, and is factory sealed, making it suitable for wet locations. All fans are 115V and are made of a UV resistant plastic housing. A radon expert should be involved to let you know which size fan is appropriate for your application, and to install the fan.

Use the PE HP175 for installations where radon levels are fairly low, and high pressure is not necessary i.e. where there is loose gravel sub slab. .57amps, 44 -65 watts, 151 CFM's at 0 static pressure. Use 4' duct.
PE HP175- 10 1/8" long 9 3/4" diameter--$113.10

The PE HP190 is ideally suited for the majority of installations. .78 amps 60-85 watts 157 CFM's at 0 static pressure. Use 4" or 5" duct.
PE HP190- 10 1/8" long 9 3/4" diameter--$135.72

The PE HP220 is your choice for systems with elevated radon levels, packed gravel or other dense substrate below the slab, multiple suctions points and a large sub slab footprint. 1.3 amps, 85-152 watts, 344 CFM's at 0 static pressure. Use 6" duct.
PE HP220- 9 1/4" long 11 3/4" diameter--$190.32

PE HP2190 preforms like the HP190, but in a smaller housing. Use 4" duct.
PE HP2190- 9 1/4" long 9 3/8" diameter--$135.72





Sizes
Quantity desired
   



The Aldes Timer
Click on picture to view full-size image
The Aldes Timer
Aldes makes a 0-1 hour timer that the homeowner can use to turn on the fan at appropriate times, for instance after a shower.

PE 1HR - - - $20.50

Price$20.50
Quantity desired
   



Tork 24 Hour Timer
Click on picture to view full-size image
Tork 24 Hour Timer
Tork timers are 24 hour timers with multiple on/off settings. They have easy to set sliding tabs capable of up to 36 on/off cycles, each lasting 20 minutes The manual override switch will not disturb the automatic settings.

PE 701A - - - $45.10


Price$45.10
Quantity desired
   



Humidistat by Johnson Controls
Click on picture to view full-size image
Humidistat by Johnson Controls
Turns fan on and off at set humidity levels from 10 to 90% relative humidity. Comes with decorative cover. For low or line voltage.

PE RDH24 - - - $106.65

Price$106.65
Quantity desired
   



Tamarack Airetrak Advantage
Click on picture to view full-size image
Tamarack Airetrak Advantage
One control does it all. This newer version of the Airetrak 1A (PE AR1A above) is easier to set up, and has a fan and light as well as a fan only switch. It even features a digital clock display. It can be used to switch on any fan that draws up to 3 amps and has a replaceable fuse. The program that you set up is maintained in the event of a power outage. One year warranty.


PE ARAD---$83.00
Price$83.00
Quantity desired
   



Humidity /Timer Control
Click on picture to view full-size image
Humidity /Timer Control
This is a new Panasonic product, three conrols build into a single wall switch sized unit. The top indicator light shows when the condensation sensor is on. The condensation sensor automatically turns on the exhaust fan when the dew point (point of condensation) is reached. It works in all climates, all seasons. Push the middle button, and the fan stays on for an adjustable 30 seconds to 60 minutes. The bottom button is a manual on/off option. This unit is compatable with all single speed Panasonic fans.

PE FVWCCS1---$51.75
Price$51.75
Quantity desired
   



Intermatic No Tick Shut-Off timer
Intermatic No Tick Shut-Off timer
Programmable timer can be set to allow an appliance, such as a fan, to run from one minute to 24 hours with override capability. Digital readout shows how much time is remaining.

PE 160C - - - $62.00

Price$62.00
Quantity desired
   



Delay Off Timer
Click on picture to view full-size image
Delay Off Timer
The Panasonic preset count down delay timer has 4 buttons. Each one turns the fan off in the preset number of minutes, 10, 20, 30, or 60.

PE FV-WCDO_ _ _ $45.00
Price$45.00
Quantity desired
   



Intermatic Temperature Control
Click on picture to view full-size image
Intermatic Temperature Control
Thermostat that can be set to turn a fan on and off at selected temperatures.

PE TH - - - $30.75

Price$30.75
Quantity desired
   



The Solar Powered Fan-Attic
Click on picture to view full-size image
The Solar Powered Fan-Attic
The Fan-Attic is a self contained unit that can be placed on the roof, and be fully operational within an hour. Installation consists of mounting the flashing over a 13" diameter hole cut through the roof sheathing. An 11-watt photovoltaic module integrated into the fan's cover generates continuous power supply to an efficient, low voltage fan motor. Because the fan uses no electricity (and doesn't require an electrician for installation) the unit pays for itself in a short time. The fan works slower in early morning and late afternoon hours. During the hottest part of the day, when the most circulation is needed, the solar panel produces its highest output.This allows the Fan-Attic to remove 600 to 800 cubic feet per minute (cfm's) of air. This stale air is replaced by fresh outdoor air drawn in through your pre-existing attic vents. The fan comes with a built in thermostat that turns on the attic fan when the temperature in the attic reaches approximately 80 F and off when the temperature goes back down to 70 F. This is a good option in climates where winter moisture build up in the attic is not as issue. Turning the fan off on colder days will prevent this cool air from conducting into your living space. It will also extend the life of the fan. You can choose not to wire in this feature.
One Fan-Attic will ventilate about 1200 square feet. For larger attics, place one Fan-Attic at each end of the attic.

The Fan-Attic is made of ABS plastic with an alloy coated steel base and flashing. The base is mushroom shaped, so that water can not enter the unit, but hot stale air is vented out.
PE FA - - - $350.00

Lead flashing
A lead flashing is required if the unit is being installed on a tile roof, so that the base can conform to the roof surface.
PE FAL - - - $63.70

The thermal snap switch is designed to turn on the attic fan when the temperature in the attic reaches approximately 80 F and off when the temperature goes back down to 70 F. This is a good option in climates where winter moisture build up in the attic is not as issue. Turning the fan off on colder days will prevent this cool air from conducting into your living space. It will also extend the life of the fan.

Options
Quantity desired
   



QuietCool Gable Fan
Click on picture to view full-size image
QuietCool Gable Fan
All gable fans were not created equal! This QuietCool gable vent is quieter, more efficient, and Energy Star rated. Yes, it costs more than the Home Depot or Lowe's version, but in one year, you'll make that difference back in lower electric bills. That's because the QuietCool Gable Vent has a DC motor, and only uses one watt of electricity for every CFM (cubic feet per minute) of fan speed.
Motor Voltage 120 V. AC, 60 Hz
Motor Amperage .25 Amps
Power Consumption 30 Watts
Motor Speed 1,100 RPM
Air Flow @0.1" SP 1,560 CFM California Energy Commission Tested
CFM/WATT 52.0 - The CA Energy Commission Highest Ranked Efficiency Product!
Gable Fan Dimensions The housing is 14-3/8" inside diameter, approximately 14-5/8" outside diameter.
Motor Voltage 120 V. AC, 60 Hz
Motor Amperage .25 Amps
Power Consumption 30 Watts
Motor Speed 1,100 RPM
Air Flow @0.1" SP 1,560 CFM California Energy Commission Tested
CFM/WATT 52.0 - The CA Energy Commission Highest Ranked Efficiency Product!
Gable Fan Dimensions The housing is 14-3/8" inside diameter, approximately 14-5/8" outside diameter.
Motor Voltage - 120 V. AC, 60 Hz

Motor Amperage - .25 Amps

Power Consumption - 30 Watts

Motor Speed - 1,100 RPM

Air Flow @0.1" SP - 1560 CFM

CFM/Watt - 52.0 (HIGHEST RANKING BY CA ENERGY COMMISSION)

Shipping Weight - 18 lbs

Gable Fan Dimensions: The housing is 14-3/8" inside diameter, approximately 14-5/8" outside diameter.

PE AFG_ _ _ $295.00
Price$295.00
Quantity desired
   



Broan Interior Wall Fans - Square
Click on picture to view full-size image
Broan Interior Wall Fans - Square
These Broan Fans install in interior walls to help balance room temperatures. great for moving wood stove heat to an adjacent room, or making rooms without adequate ducting more comfortable. The fan adjusts for 3" to 5.5" wall thickness. The grills are a paintable white plastic. A speed control is included.

PE 511 - - - $125.75
13.5" square grill (11.5" rough opening), 180 CFM's

Price$125.75
Quantity desired
   



Broan Interior Wall Fans - Round
Click on picture to view full-size image
Broan Interior Wall Fans - Round
These Broan Fans install in interior walls to help balance room temperatures. Great for moving wood stove heat to an adjacent room, or making rooms without adequate ducting more comfortable. The fan adjusts for 3" to 5.5" wall thickness. The grills are a paintable white plastic.

PE 512 - - - $55.25
8" round grill (7.5" round rough opening), 90 CFM's

Price$55.25
Quantity desired
   



Tamarack RAP Interior Wall Vents
Click on picture to view full-size image
Tamarack RAP Interior Wall Vents
Most bedrooms do not include an air return to the furnace or air conditioner. The resulting build up of air pressure means that the HVAC system is working harder than it should. Undercutting the bedroom door provides too small an air pathway. A better idea, install the RAP in the bedroom wall. A honey comb baffle in the Tamarack RAP smoothes the flow of air while greatly blocking out light and sound from the adjacent room or hallway. Also great for darkrooms!! Comes in white, but can be spray painted.

PE RAP124 - - - $40.95
12" x 4" rough opening

PE RAP126---$50.16
12" x 6" rough opening.

PE RAP1212---$79.00
12" x 6" rough opening.

Model
Quantity desired
   



 In-Door Pressure Balancing Vent
In-Door Pressure Balancing Vent
Here's a simple solution to a common problem. How do you balance temperature and ventilation between rooms, or between a hallway and a bedroom? The Tamarack Prefect Balance in-door vent is an easy to install and attractive solution. The vent has a patented light and sound reduction system, and is made of paintable and durable white ABS plastic. The rough opening of 24" X 4" fits at the bottom of most standard size doors. The product full size is 27 1/4" X 4 3/4" with a 1 5/8" depth.

PE PressureReliefValve ---$31.00
Price$31.00
Quantity desired
   



Tamarack Dragon Garage Fan
Click on picture to view full-size image
Tamarack Dragon Garage Fan
Unhealthy fumes from gasoline, fertilizer, paints, and auto exhaust can easily flow into your home through an attached garage. The Tamarack Dragon is built to quietly and efficiently ventilate your garage. This all in one fan unit has everything you need for easy, through the wall installation. It features a powerful rotor motor and a spring loaded backdraft damper.

PE DR180 ventilates a single car garage 14 1/2" x 11 11/16", 8" duct, 180 CFM's--$135.00

PE DR150 ventilates a two bay garage. 15 1/2" x 13 1/4" box, 6" duct 235 CFM's---$273.00

PE DR200 ventilates a three bay garage or a garage/workshop. 15 1/2" x 16 1/16" box, 8" duct-, 416 CFM's--$331.00

CFM Ratings
Quantity desired
   



Search our catalog for:

Shopping cart provided by: EasyCart.com