- Benches - Bleachers - Cages and Inground Equipment - Cages and Inground Equipment - Section 2 - Discus, Hammers and Shotputs - Display Clocks and Gauges - Equipment Carts - Fat Pads and Training Pads - Folding Mats - Folding Mats - Section 2 - Football - Gymnastic Competition Landing Mats - Hurdles - Judges Stands - Landing Areas High Jump - Landing Areas Pole Vault - Measuring Devices - Miscellaneous - Player Shelters - Pole Vault and High Jump Uprights - Preschool Recreation and Gymnastic Equipment - Preschool Recreation and Gymnastic Equipment - Section 2 - Preschool Recreation and Gymnastic Equipment - Section 3 - Soccer - Spirit Crossbars and Pole Vault Accessories - Spirit Vaulting Poles - Spirit Vaulting Poles - Section 2 - Spirit Vaulting Poles - Section 3 - Starting Blocks and Markers - Steeplechase and Water Jump Barriers - Strength and Speed - System Universal Mats - Wall Panels and Gymnasium Equipment -

Long Jump/Triple Jump Pit Form, Sand Catcher and Cover System
Click on picture to view full-size image

Long Jump/Triple Jump Pit Form, Sand Catcher and Cover System
The UCS Long Jump/Triple Jump stay in place form and sand catcher system is manufactured to exact NFHS, NCAA and IAAF specifications out of a powder coated aluminum. The result – a sand pit that is not only to the correct size but also aesthetically pleasing to the eye.

Custom made in modular panels, covers are constructed out of 9 1/2'' x 13/4'' x 1/8'' aluminum and framed with a 2 1/2'' x 1 1/2'' x 1/4'' aluminum angle. We reinforce the underside with a 2 1/2'' x 1 1/2'' x 1/4'' aluminum angle. Each cover panel features four recessed aluminum handles for ease in removing and replacing the cover.

Features:
• Reduction in cost.
• Meets all the tolerances specified.
• Easy to assemble.
• Accurate.
• Meets IAAF and NCAA specifications.
• Aesthetically pleasing.
• 18 1/2'' wide sand catchers keep area around the pit neat.
• Aluminum grate and resilient perforated mats cover the sand catcher.

UCS offers a range of combinations to fit your needs:
• The 519-3215: includes a pre-fabricated aluminum cover that has the perfect fit.
• The 519-3200: sand pit form and sand catcher.
• The 519-3210: sand pit form and cover.
• The 519-3100: sand pit form only.

We also offer the same package combinations in custom sizes. Please consult factory for availability or any custom orders: 1.800.526.4856.
Product #NamePriceQuantity
519-3215Pit Form, Sand Catcher and Aluminum Cover$21178.00
519-3200Pit Form and Sand Catcher$15760.00
519-3210Pit Form and Aluminum Cover$14082.00
519-3100Pit Form Only$7425.00
   


Aluminum Track Curbing
Click on picture to view full-size image

Aluminum Track Curbing
We take the guesswork out of curbing. UCS Aluminum Track Curbing meets IAAF, NCAA and USATF rules and is available in standard 6.10m (20') sections that easily interlock for perfect alignment. The interlocking design minimizes the number of holes drilled and for quick removal of sections for javelin runway, water jump approach, maintenance equipment and vehicles. Foam protective pads are included for exposed ends while sections are removed. Curved sections are customized to match your track radius. Track curbing is manufactured out of a rounded corner profile that measures 2" x 2" (5cm x 5cm) and is designed to sit 1/2" off the track surface to allow for proper drainage. UCS recommends that all your curbing be powder coated to protect against oxidation. Available in powder coated silver, gold or white, as well as non-powder coated (mill finish).

Let UCS Engineers take the guesswork out of your curbing requirements. Our competent staff is ready to assist you.

Features:
• UCS curbing sections come complete with pins and ground sleeves for setting into the track.
• The UCS pad system raises the curbing 1/2" off the track to allow for proper drainage.
• UCS interlocking design makes removal of sections easy and also allows for expansion and contraction.

IAAF Certification #: E-99-0063

When ordering, enter the number of feet you require under "Quantity" (IE:If you need 50 feet, the quantity would be "50")

Note: This item usually ships within 2-4 weeks.

Cick here to return to previous page
Product #NamePriceQuantity
792-9410Powder Coated Gold$10.50 per linear foot
792-9411Powder Coated Silver$9.50 per linear foot
792-9412Non-Powder Coated$8.50 per linear foot
792-9413Powder Coated White$9.50 per linear foot
   


Rotating Track Gate
Click on picture to view full-size image

Rotating Track Gate
Reducing wear of the three inside lanes will add years of life to your running surface. Manufactured out of 4" x 2" (10cm x 5cm) aluminum beam and 5" x 2" (13cm x 5cm) upright aluminum beams, rotating the gate is quick and easy. Merely lift the gate and rotate, the gate will lock itself into the desired position (each 90° increment). All UCS track gates are shipped complete with ground sleeves.

Note: This item usually ships within 2-4 weeks.

Cick here to return to previous page
Product #NamePriceQuantity
792-9000Single Rotating Track Gate$1000.00
792-9004Set of 4 Rotating Track Gates$3670.00
   


Long Jump/Triple Jump Aluminum Pit Covers
Click on picture to view full-size image

Long Jump/Triple Jump Aluminum Pit Covers
Custom made in modular panels for a perfect fit, the UCS covers are constructed out of 9 1/2" x 1 3/4" x 1/8" aluminum and framed with a 2 1/2" x 1 1/2" x 1/4" aluminum angle. For extra strength we then reinforce the underside with 2 1/2" x 1 1/2" x 1/4" aluminum angle. Each cover panel features four recessed aluminum handles for ease in removing and replacing the cover.

When ordering, enter the number of square feet you require under "Quantity" (IE: If you need 50 square feet, the quantity would be "50")

Note: This item usually ships within 2-4 weeks.

Cick here to return to previous page
Product #NamePriceQuantity
519-1215Recessed$30.00 per square foot
519-1216Non-Recessed$30.00 per square foot
   


Water Jump Covers
Click on picture to view full-size image

Water Jump Covers
Custom engineered to fit and last. Custom engineered into four parts – with three sections measuring 38 1/2" x 143 1/2", and one section measuring 28" x 143 1/2". The cover sits on five 4" x 2" rectangular aluminum beams that serve as an understructure for the panels. The frame is aluminum, 2 1/2" x 1 1/2" x 1/4". The planking is 9 1/2" x 1 3/4" x 1/8” thick aluminum material with built-in structural reinforcement.

Note: This item usually ships within 2-4 weeks.

Cick here to return to previous page
Product #NamePriceQuantity
505-5420Recessed Cover$6174.00
506-5421Flush Cover$6174.00
   


Search our catalog for:

Shopping cart provided by: EasyCart.com
511 Hoffman Road • Lincolnton, North Carolina • 28092
Telephone: 1.800.526.4856 • 1.704.732.9922
Fax: 1.888.810.4070 • 1.704.732.9559